Details Near Miss ship safety cartoon (7)
- Categories:Trade News
- Author:MarinSmart Expert Committee
- Origin:MarinSmart Platform
- Time of issue:2022-04-12 15:17
- Views:
(Summary description)
Details Near Miss ship safety cartoon (7)
(Summary description)
- Categories:Trade News
- Author:MarinSmart Expert Committee
- Origin:MarinSmart Platform
- Time of issue:2022-04-12 15:17
- Views:
01
He picks up a bucket of painting from the shelf.
1. He stands at the shelf edge, if the ship shakes, he might fall and hurt.
2. His posture might hurt his back.
3. If he steps on the paint bucket when gets off the shelf, that might hurt his foot (sprain the foot).
4. His hand might be crushed between paint busket and shelf pole.
02
He is transporting paint buskets.
1. His posture might hurt his back.
2. When he pulls handcart up the slope, the paint busket might roll down to hurt others.
3. His heels might be hurt.
4. Pulling handcart up the slope, he might fall to the ground because hancart is too heavy.
03
He is stepping on ladder and valve to paint high.
1. If the valve under his right foot rotates, he will lose balance to fall.
2. If the ladder under his left foot moves, he will lose balance to fall.
3. With both hands busy, he might lose balance to fall.
04
They are painting up on the ship’s bridge board.
1. A might accidently fall.
2. If the right rope slides, making bridge board unbalance, A and B might fall.
3. If the air pipe hanging up on bridge board cracks, A and B might fall.
05
They paint up on the ship.
1. A might be tripped up by B’s foot.
2. If A touches B, B might fall into the sea.
3. B hangs on the railings, if the ship shakes, he might lose balance to fall into sea.
4. Paint bucket might fall to hurt others.
06
Using grinder machine to grind metal bar.
1. Metal bar might fly up to hurt him.
2. Splashing debris might hurt his eyes.
3. If grinder breaks, the fragments might hurt his eyes.
4. Because of friction heating, he might loosen his grip and finally hits on his feet.
07
Using high-speed cutter to cut metal bar.
1. Splashing debris from cutter might hurt A’s eyes.
2. B’s posture might hurt their backs.
3. Splashing sparks from cutter might ignite rags and cotton yarn in the box.
08
He wears gloves to drill metal bar on the drilling machine.
1. The rotating metal debris might hurt his left hand.
2, Splashing metal debris might hurt his left hand.
3. His might be hurt by rotating drilling bit and entangled belt.
Scan the QR code to read on your phone
CONTACT US
WinKong Marine Engineering Co., Ltd.
Address: 15-19F, Zhongxin Building No. 263 Liaoning Road, Qingdao, Shandong Province, China, 266012
E-mail: newmkt@winkong.net
Fax: +86-532-83807505
Tel: +86-0532-83838072/+86-18863991891
Qingdao Free Trade Zone MarinSmart Supply Chain Co., Ltd.
Address: 8101-1-6(A), 1st floor, Qiantongyuan Building, No.44 Moscow Road, Qianwan bonded area, Shandong Province, China, SDPFTZ
Qingdao MarinSmart Technology Co., Ltd.
Address: 15-19F, No.263 Liaoning Road, Shibei District, Qingdao, Shandong Province, China
Qingdao Winkong Invest & Developing Co., ltd.
Address: 1702 Room, Zhongxin Building No. 263 Liaoning Road, Qingdao, Shandong Province
Qingdao MarinSmart Ship Design Institute Co., Ltd.
Address: 16F-B, No.263 Liaoning Road, Shibei District, Qingdao, Shandong Province,China.
Qingdao Global Marine Safetycare Technology Co., Ltd.
Address: Shandong University of Science and Technology, No. 579 Qianwangang Road, Huangdao district, Qingdao, Shandong Province,China.
MarinSmart Global Service Pte. Ltd.
Address: 2 Jurong East Street 21 #04-21C IMM Building Singapore 609601
© Winkong Marine Engineering Co.,Ltd. 鲁ICP备06011101号 Powered by 300.cn